Description:
Planet Technology's IPOE-171-95W is a single port industrial 802.3bt power over Ethernet injector with a maximum of up to 95W of power output over Ethernet cable. It is also equipped with two 100M, 1G, 2.5G, 5GBASE-T RJ45 copper interfaces to handle extremely large amounts of data transmission.
This single port POE ++ injector is specifically designed to meet the demand for growing higher power required network equipment such as lighting, all in one touch PC, remote digital signage display and other network devices, which need higher power to work.
The IPOE-171-95W delivers the Ethernet digital data with 54V DC power over the twisted pair cables as a 95W Power over Ethernet Injector and the connected ultra Power over Ethernet splitter. The unit will separate the digital data and the power into three optional outputs of 12V or 24V DC with distance up to 100m.
To facilitate the 802.3bt PoE++ usage with commonly used 12 to 48V DC power input for transportation and industrial level applications, the IPOE-171-95W adopts 12 to 48V DC to 54V power boost technology to solve power source issue but does not require special power supplies.
Features:
Interface
Power over Ethernet
Hardware
Industrial Case and Installation
Specifications:
| Interface | Input Port 1 x RJ45 STP Data In 1 x RJ45 STP PoE data plus power Out Input power terminal block 1 |
| Network Cable | Twisted pair cable up to 100m / 328ft 10BASE-T: 4 pair UTP CAT 3, 4, 5, 5e, 6 100BASE-TX: 4 pair UTP CAT 5, 5e, 6 1000BASE-T: 4 pair UTP CAT 5e, 6 |
| Data Rate | 10/100/1000Mbps |
| Power | Requirement: DC 12 to 48V, 5A max Consumption: 120W max |
| Unit Output Voltage | DC 54V |
| Construction | IP30 rated slim type metal case enclosure |
| PoE Standard | IEEE 802.3at/bt PSE |
| Standards Compliance | IEEE 802.3 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3ab 1000BASE-T Gigabit Ethernet IEEE 802.3bt 4-pair Power over Ethernet Type 4 IEEE 802.3at Power over Ethernet Plus |
| PoE Mode | Standard: To provide power to the PD devices that follow the IEEE 802.3at/bt standard Legacy: To provide power to the PD devices that do not fully follow the IEEE 802.3af/at/bt standard Besides, the Legacy mode supports PoH and Ultra PoE |
| PoE Power | Output Budget: DC 54V / 95W PoE via 4 pair DC 54V / 36W PoE via 2 pair Output: DC 24V to 48V input: Max. 89.5W @1m cable Max. 75W @100m cable DC 12V input: Max 60W @ 1m cable Max 52W @ 100m cable Supply Type: End span plus Mid span |
| Power Pin Assignment | Pair 1 End span: 1/2 (-), 3/6 (+) Pair 2 Mid span: 4/5 (+), 7/8 (-) |
| No. of Devices That Can Be Powered | 1 |
| LED Indicators | Power 1 (green) Power 2 (green) Fault (red) PoE Port: PoE in Use x 1 (amber) PoE Usage: PoE Usage x 3 (amber) |
| Alarm | Provides one relay output for power failure Alarm Relay current carry ability1A @ DC 24V |
| Operating Temperature | Operating: -40°C / -40°F to 75°C / 167°F Relative Humidity: 5% to 90% relative humidity non condensing |
| Dimensions | Height: 32mm / 1.26" Width: 135mm / 5.32" Depth: 87.8mm / 3.46" |
| Weight | 470g / 1.04lb |
| Installation | DIN rail kit or wall mount ear |
| Certifications | FCC Part 15 Class A, CE |
Download User Guides:
Data Sheet
Quick Start Guide
Wishlist is empty.
PRIZE DRAW
