PRIZE DRAW
Zoom
Description
The LX-NZ30 4KUHD 2023 Laser Projector With HDR from JVC uses a new high power BLU-Escent light source which delivers 3,300 lumens and is rated for 20,000 hours of operation. Both HDR10 and HLG formats are supported with automatic picture mode selection.
This is the ideal projector for high frame rate gaming and home cinema, especially in rooms with higher ambient light.
A new 105W Blue Laser diode assembly replaces the previous 95W design, making it possible to achieve higher brightness of 3,300 lumens. This is an improvement of about 10% over the previous model (LX-NZ3). High brightness allows for use in ambient lighting rooms, etc., while increasing the peak brightness during HDR. You can project HDR content with sharp, higher quality, dynamic images. In addition to the HDR 10 used in the ULTRA HD Blu-ray™, it also supports the HLG (Hybrid Log Gamma) used in broadcasting. When each signal is detected, it automatically switches to the best quality mode, so you can enjoy HDR content without having to adjust individual settings projection, allowing you to enjoy images with a wider dynamic range.
For gamers the LX30 supports up to 1080P/240Hz input with latency as low as 6.25ms*, which allows users to enjoy game content with a frame rate much higher than conventional projectors. This delivers the absolute smoothest motion on the largest projection screens.
In addition to the keystone correction function that can adjust the horizontal, vertical and tilt, this projector is equipped with various other new adjustment functions. Corner adjustment can adjust all four corners, while warping can correct distortion for each area. In combination with the lens shift, it is possible to install with a high degree of flexibility.
Specifications:
| Display Device | 0.47" DMD 1920 x 1080 |
| Resolution | 3840 x 2160 |
| Lens | 1.6x manual zoom focus lens f = 14.3 ~ 22.9 mm, F 1.809 |
| Lens Shift | Vertical 60% Horizontal 23% (Manual) |
| Projection Size | Type 60 ~ 200 |
| Lens Ratio | 1.36-2.17:1 |
| Light Source | BLU-Escent laser diode |
| Brightness | 3,300lm |
| Input terminal | |
| HDMI | 2 HDCP 2.2 |
| Display Port | 1 (1.2a) |
| USB | 1 USB *2 |
| Output Terminal | |
| USB Type A | 1 Power Supply 5V/2.5A |
| Triggers | 1 Mini Jack, 12V/0.1A |
| Control Terminal | |
| RS232C | 1 D-Sub 9 pin |
| LAN | 1 RJ-45 |
| Power Consumption | 360W Standby: 0.5W |
| Power Supply | 100 VAC to 240V 50 / 60Hz |
| Finish | Black and white |
| Dimensions | Height: 146mm / 5.75" Width: 405mm / 15.95" Depth: 341mm / 13.43" |
| Weight | 5.9kg / 13.01ln |
| Notes | *1:When the Low Latency Mode is "On" *2: The connection requires an authenticated USB Type-CTM cable that supports DP Alt mode. Only cables with type C on both ends can be connected. |
Features:
- High efficiency BLU-Escent laser light source delivers 3,300 lumens and 20,000 hour long life
- Supports HDR with rich video content
- Smooth video and low latency with support for high frame rate, up to 1080P/240Hz
- New connectivity options including 2 x HDMI, 1 x DP 1.2a USB, RRS232C and Lan Control and also 12V trigger
- Equipped with a lens shift of ± 60% vertical, ± 23% horizontal and 1.6X zoom for installation flexibility
- Extensive geometric distortion correction for ease of installation
- High performance Dynamic Dimming Control
- 0.47" DMDTM enables high definition 4K display
- Compact cabinet available in black and white finishes
User guides
Download User Guides:
Data Sheet
User Manual
Favourites
Favourites is empty.
Compare
Shopping Cart